Product specifications

Installing the Singlewire-enabled Speaker
Set Up and Test the Speaker
Operations Guide 930463A CyberData Corporation
30
2.2.6 Using the Microphone
During an active call, the microphone can be used to “talk” to someone at a pre-configured IP phone
extension. See
Figure 2-10.
Figure 2-10. Microphone
To set the factory default settings:
1. Press and hold the RTFM button for more than five seconds.
2. The speaker announces that it is restoring the factory default settings.
Note The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Microphone