Product specifications

Installing the Singlewire-enabled Speaker

Set Up and Test the Speaker

Operations Guide 930463A CyberData Corporation

2.2.2.2 Singlewire-enabled Speaker with Extra Speaker Connection

In Figure 2-5, the Singlewire-enabled Speaker supports an amplified audio output for a second

analog speaker. While the total speaker wattage is the same, by connecting a low cost analog

speaker, additional coverage can be realized.

Speaker Setup

When using the second speaker connection, the digital volume control needs to be set to less than

level 8 while making pages. Some adjustment of this value may be required depending on the

specific PoE switch.

Figure 2-5. Singlewire-enabled Speaker with Extra Speaker Connection

8 Ohm Analog Speaker

16 gauge wire and

a maximum length

of 20 feet

Speaker

(Part #011120, RAL 9002)

(Part #011121, RAL 9003)

AUX SPEAKER (-)

AUX SPEAKER (+)

BTN SENSE GND

LINE OUT (-)

LINE OUT (+)

BUTTON LED (-)

BTN SENSE

BUTTON LED (+)

RELAY NO

RELAY COM

AUX POWER (-)

AUX POWER (+)

(+12VDC @ 1A)

J10