Product specifications

Installing the Singlewire-enabled Speaker
Set Up and Test the Speaker
Operations Guide 930463A CyberData Corporation
21
2.2 Set Up and Test the Speaker
Set up and configure each speaker before you mount it.
CyberData delivers each speaker with the following factory default values:
2.2.1 Connect Power to the Speaker
Figure 2-1 through Figure 2-3 illustrates how to connect power to the Singlewire-enabled Speaker.
2.2.1.1 Singlewire-enabled Speaker to a 802.3af Compliant PoE Switch
Figure 2-1 illustrates how to connect the Singlewire-enabled Speaker to a 802.3af compliant PoE
switch via a Cat 5 Ethernet cable.
Figure 2-1. Singlewire-enabled Speaker to a 802.3af Compliant PoE Switch
Table 2-2. Factory Network Default Settings—Default of Network
Parameter Factory Default Setting
IP Addressing DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1
802.3af Switch Class “0”
Cat 5 Ethernet cable
Speaker