Product specifications

Product Overview
Starting a Push-to-Talk Session from an IP Phone (Summary)
Operations Guide 930463A CyberData Corporation
6
1.7 Starting a Push-to-Talk Session from an IP Phone
(Summary)
To start a push-to-talk session from an IP phone:
1. Make sure that the Cisco environment is set it up with the Intercom Service.
2. On the Cisco IP phone, select the Service button.
3. Select the Informacast Intercom Service.
4. On the Cisco IP phone, dial the extension number for the Speaker that you want to call.
5. When the call from the Cisco IP phone to the Speaker is active, you can do one of the following:
• Select the Listen button on the phone to listen to someone talking into the Speaker.
• Select the Tal k button on the phone to talk to someone listening to the Speaker.
Note The IP phone always controls the talking and listening feature of the Speaker.
6. Select the Exit button to terminate the call.
Note For a more detailed explanation of this procedure with pictures, see Section 1.9, "Starting a
Push-to-Talk Session from an IP Phone (Detailed)".
1.8 Starting a Push-to-Talk Session from a Push-to-Talk
Speaker (Summary)
To start a push-to-talk session from a push-to-talk speaker:
1. Make sure that the Cisco environment is set it up with the Intercom Service.
2. Press the Remote Call Button to make the Singlewire-enabled Speaker dial a pre-programmed
IP phone extension.
3. When the call from the Singlewire-enabled Speaker to the Cisco IP phone is active, you can do
one of the following:
• Select the Listen button on the phone to listen to someone talking into the Speaker.
• Select the Tal k button on the phone to talk to someone listening to the Speaker.
Note The IP phone always controls the talking and listening feature of the Speaker.
4. Select the Exit button to terminate the call.
Note For a more detailed explanation of this procedure with pictures, see Section 1.10, "Starting a
Push-to-Talk Session from a Push-to-Talk Speaker (Detailed)".