Product specifications

Installing the VoIP V2 Speaker
Configure the SIP Parameters
Operations Guide 930468A CyberData Corporation
37
Backup Monitor User ID 1
Backup Monitor User ID 2
Type the Monitor User ID for the Backup SIP Server
(up to 64 alphanumeric characters).
Backup Monitor Auth ID 1
Backup Monitor Auth ID 2
Type the Monitor Authenticate ID for the Backup SIP Server
(up to 64 alphanumeric characters).
Backup Monitor Auth Password 1
Backup Monitor Auth Password 2
Type the Monitor Authenticate Password for the Backup SIP
Server (up to 64 alphanumeric characters).
Remote SIP Port Type the Remote SIP Port number (default 5060)
(8 character limit).
Local SIP Port Type the Local SIP Port number (default 5060)
(8 character limit).
Outbound Proxy Type the Outbound Proxy as either a numeric IP address in
dotted decimal notation or the fully qualified host name
(255 character limit [FQDN]).
Outbound Proxy Port Type the Outbound Proxy Port number (8 character limit).
Register with a SIP Server Enable or disable SIP Registration.
Re-registration Interval (in seconds) Type the SIP Registration lease time in minutes (default is 60
minutes) (8 character limit). Re-registration Interval (in
seconds)*
Unregister on Reboot When selected, on boot, the speaker will first register with a SIP
server with a expiration delay of 0 seconds. This has the effect
of unregistering any current devices on this extension.
Beep before Page When selected, the device will play a beep before a page is sent
on SIP calls (works for both buffered and live pages).
Call Disconnection
Terminate call after delay (in seconds) Type the desired number of seconds that you want to transpire
before a call is terminated.
Note: A value of 0 will disable this function.
RTP Settings
RTP Port (even) Specify the port number used for the RTP stream after
establishing a SIP call. This port number has to be an even
number and defaults to 10500.
Dial Out Settings
Dial Out Extension Type the dial out extension number (64 character limit).
Note: For information about dial-out extension strings and
DTMF tones, see Section 2.3.5.1, "Dial Out Extension Strings
and DTMF Tones (using rfc2833)".
Extension ID Type the desired Extension ID (64 character limit).
Monitor
DTMF toggle key Specify the phone keypad button that you want to use to toggle
back and forth between the talking and listening mode when the
device is in Monitor Mode.
Table 2-8. SIP Configuration Parameters (continued)
Web Page Item Description