Product specifications

Installing the VoIP V2 Speaker
Configure the SIP Parameters
Operations Guide 930468A CyberData Corporation
36
2. On the SIP Configuration page, you may enter values for the parameters indicated in Table 2-8.
Table 2-8. SIP Configuration Parameters
Web Page Item Description
Primary SIP Server Shows the current status of the Primary SIP Server.
Backup Server 1 Shows the current status of Backup Server 1.
Backup Server 2 Shows the current status of Backup Server 2.
Monitor SIP Server Shows the current status of the Monitor SIP Server.
Monitor Server 1 Shows the current status of Monitor Server 1.
Monitor Server 2 Shows the current status of Monitor Server 2.
Enable SIP Operation Enables or disables SIP operation.
SIP Settings
Primary SIP Server Use this field to set the address (in dotted decimal notation or as
a canonical name) for the Primary SIP Server. This field can
accept canonical names of up to 255 characters in length.
Primary SIP User ID Type the SIP User ID for the Primary SIP Server
(up to 64 alphanumeric characters).
Primary Auth ID Type the Authenticate ID for the Primary SIP Server
(up to 64 alphanumeric characters).
Primary Auth Password Type the Authenticate Password for the Primary SIP Server
(up to 64 alphanumeric characters).
Primary Monitor User ID Type the Monitor User ID for the Primary SIP Server
(up to 64 alphanumeric characters).
Primary Monitor Auth ID Type the Monitor Authenticate ID for the Primary SIP Server
(up to 64 alphanumeric characters).
Primary Monitor Auth Password Type the Monitor Authenticate Password for the Primary SIP
Server (up to 64 alphanumeric characters).
Backup SIP Server 1
Backup SIP Server 2
• If all of the Primary SIP Server and Backup SIP Server fields
are populated, the device will attempt to stay registered with all
three servers all of the time. You can leave the Backup SIP
Server 1 and Backup SIP Server 2 fields blank if they are not
needed.
• In the event of a registration failure on the Primary SIP Server,
the device will use the next highest priority server for outbound
calls (Backup SIP Server 1). If Backup SIP Server 1 fails, the
device will use Backup SIP Server 2.
• If a higher priority SIP Server comes back online, the device
will switch back to this server.
Backup SIP User ID 1
Backup SIP User ID 2
Type the SIP User ID for the Backup SIP Server
(up to 64 alphanumeric characters).
Backup SIP Auth ID 1
Backup SIP Auth ID 2
Type the SIP Authenticate ID for the Backup SIP Server
(up to 64 alphanumeric characters).
Backup SIP Auth Password 1
Backup SIP Auth Password 2
Type the SIP Authenticate Password for the Backup SIP
Server (up to 64 alphanumeric characters).