Manualshelf

Product specifications

ManualsBrandsCyberData ManualsComputer equipment011181
31323334353637383940
Installing the VoIP V2 Speaker
Log in to the Configuration Home Page
Operations Guide 930468A CyberData Corporation
28
3. On the Home Page, review the setup details and navigation buttons described in Table 2-5.
Table 2-5. Home Page Overview
Web Page Item Description
Device Settings
Device Name Shows the device name (25 character limit).
Change Username Type in this field to change the username (25 character limit).
Change Password Type in this field to change the password (19 character limit).
Re-enter Password Type the password again in this field to confirm the new password
(19 character limit).
Current Settings
Serial Number Shows the device serial number.
Mac Address Shows the device Mac address.
Firmware Version Shows the current firmware version.
IP Addressing Shows the current IP addressing setting (DHCP or Static).
IP Address Shows the current IP address.
Subnet Mask Shows the current subnet mask address.
Default Gateway Shows the current default gateway address.
DNS Server 1 Shows the current DNS Server 1 address.
DNS Server 2 Shows the current DNS Server 2 address.
Speaker Volume Shows the current speaker volume mode:
Digital (web page) or Analog (volume knob).
SIP Mode is Shows the current status of the SIP Mode.
Multicast Mode is Shows the current status of the Multicast Mode.
Clock is Shows the current status of the Clock.
Event Reporting is Shows the current status of the Event Reporting.
Nightringer is Shows the current status of the Nightringer.
Primary SIP Server Shows the current status of the Primary SIP Server.
Backup Server 1 Shows the current status of Backup Server 1.
Backup Server 2 Shows the current status of Backup Server 2.
Monitor SIP Server Shows the current status of the Monitor SIP Server.
Monitor Server 1 Shows the current status of Monitor Server 1.
Monitor Server 2 Shows the current status of Monitor Server 2.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.