Product specifications

Installing the VoIP V2 Speaker
How to Set the Factory Default Settings
Operations Guide 930468A CyberData Corporation
24
2.3 Configure the Speaker Parameters
To configure the speaker online, use a standard web browser.
Configure each speaker and verify its operation before you mount it. When you are ready to mount a
speaker, refer to
Appendix A, "Mounting the Speaker" for instructions.
All speakers are initially configured with the default IP settings indicated in Ta bl e 2-3:
Note When configuring more than one speaker, attach the speakers to the network and configure
one at a time to avoid IP address conflicts
Table 2-3. Factory Network Default Settings—Default of Network
Parameter Factory Default Setting
IP Addressing DHCP
IP Address
a
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Mask
a
255.0.0.0
Default Gateway
a
10.0.0.1