Product specifications

Implementing the VoIP V3 Zone Controller

Upgrading the Firmware

Operations Guide 930446E CyberData Corporation

2.5.0.1 Upgrade the Firmware

To upload the firmware from your computer:

1. Retrieve the latest VoIP Zone Controller firmware from the VoIP V3 Paging Server Downloads

page at:

http://www.cyberdata.net/products/voip/legacyanalog/pagingzonev3/downloads.html

2. Unzip the VoIP Zone Controller version file. This file may contain the following:

• Firmware file

• Release notes

3. Log in to the VoIP Zone Controller home page as instructed in Section 2.4.3, "Log in to the

Configuration GUI".

4. Click the Update Firmware button to open the Upgrade Firmware page. See Figure 2-21.

5. Click Browse, and then navigate to the location of the VoIP Zone Controller firmware file.

6. Click Submit.

Note This starts the upload process. Once the VoIP Zone Controller has uploaded the file, the

Uploading Firmware countdown page appears, indicating that the firmware is being

written to flash. The VoIP Zone Controller will automatically reboot when the upload is

complete. When the countdown finishes, the Upgrade Firmware page will refresh. The

uploaded firmware filename should be displayed in the system configuration (indicating

successful upload and reboot).