Product specifications

Implementing the VoIP V3 Zone Controller
Configuring the VoIP Zone Controller
Operations Guide 930446E CyberData Corporation
26
2.4.9 Configure the Zone Parameters
• Each audio output jack on the VoIP Zone Controller represents a Zone.
•A Group is comprised of a combination of one or more Zones.
• You will need to plug any Zones that are used on the VoIP Zone Controller into an analog
amplifier. Any speakers attached to the amplifier will be present in the Zone.
1. Click on the Zone Config button to open the Zone Configuration page. See Figure 2-13.
Figure 2-13. Zone Configuration Setup