Manualshelf

Product specifications

ManualsBrandsCyberData ManualsComputer equipment011171
21222324252627282930
Implementing the VoIP V3 Zone Controller
Configuring the VoIP Zone Controller
Operations Guide 930446E CyberData Corporation
19
5. On the SIP Setup page, enter values for the parameters indicated in Tab le 2-7.
1. Enter the IP address of the SIP Server.
2. Enter the port numbers used for SIP signaling:
a. Remote SIP Port
b. Local SIP Port
Table 2-7. SIP Configuration Parameters
Web Page Item Description
SIP Settings
SIP Server Type the SIP server represented as either a numeric IP address
in dotted decimal notation or the fully qualified host name (255
character limit [FQDN]).
Remote SIP Port Type the Remote SIP Port number (default 5060)
(8 character limit).
Local SIP Port Type the Local SIP Port number (default 5060)
(8 character limit).
Outbound Proxy Type the Outbound Proxy as either a numeric IP address in
dotted decimal notation or the fully qualified host name
(255 character limit [FQDN]).
Outbound Proxy Port Type the Outbound Proxy Port number (8 character limit).
SIP User ID Type the SIP User ID (up to 64 alphanumeric characters).
Authenticate ID Type the Authenticate ID
(up to 64 alphanumeric characters).
Authenticate Password Type the Authenticate Password (up to 64 alphanumeric
characters).
Register with a SIP Server Enable or disable SIP Registration.
For information about Point-to-Point Configuration, see Section
2.4.6.1, "Point-to-Point Configuration".
Re-registration Interval (in seconds) Type the SIP Registration lease time in seconds (default is 60
minutes) (8 character limit). Re-registration Interval (in seconds)
Unregister on Reboot When selected, on boot, the device will first register with a SIP
server with a expiration delay of 0 seconds. This has the effect
of unregistering any current devices on this extension.
Buffer SIP Calls When this is enabled, SIP calls to the device will be stored in
memory and will play when either the call is terminated or the
buffer is full. The receive buffer is 2MB in size and this is equal
to about four minutes of ulaw encoded audio.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.