Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index
Mounting the Indoor Intercom
PCB Dimensions
Operations Guide 930500E CyberData Corporation
70
A.6 PCB Dimensions
Figure A-5 shows the PCB dimensions and the intrusion sensor range.
Figure A-5. PCB Dimensions and Intrusion Sensor Range
SW1
J1
JP7
J5
JP10
J4
JP1
JP5
J3
J7
J6
J2
TOP SIDE
BOTTOM SIDE
J10
4.200 [106.68]
4.200 [106.68]
0.063 [1.60]
0.591 [15.00]
0.516 [13.10]
DIMENSIONS ARE IN INCHES [MILLIMETER]
0.063 [1.60]
2.300 [58.42]
3.700 [93.98]
ø0.138 [ø3.51]
Fits #6-32 Machine Screw
(4 Places)
1.169 [29.70]
Eective Range for
Intrusion Sensor to Function
from 3 mm to 14 mm
0.118 [3.00]
0.551 [14.00]
< Intrusion Sensor >