Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index
Mounting the Indoor Intercom
Gang Box Option
Operations Guide 930500E CyberData Corporation
69
A.5 Gang Box Option
Figure A-4 shows a 1-Gang Box and a 2-Gang Box mounting option.
Figure A-4. Gang Box Mounting
Gang Box Mounting Screw (4x)
Wall Cutout
Wall Cutout
or Two Gang Box
Backplate accepts
Single Gang Box
Single Gang Box use two
Backplate
121002B
Kit
Accessory
Screw
Slot
Entry
Entry
Cable
Cable
Top
Top