Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index
Mounting the Indoor Intercom
Wall Cutout Dimensions
Operations Guide 930500E CyberData Corporation
68
A.4 Wall Cutout Dimensions
Figure A-3 shows the maximum recommended wall cutout dimensions.
Figure A-3. Maximum Recommended Wall Cutout Dimensions
Dimensions are in Inches [Millimeter]
Wall Cutout
0.25 [6.4]
0.25 [6.4]
0.25 [6.4]
0.25 [6.4]
Top Cable Entry Closed
Top Cable Entry Opening