Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index

Operations Guide 930500E CyberData Corporation
61
Installing the VoIP V3 Indoor Intercom
Command Interface Post Commands
2.6 Command Interface
Some functions on the device can be activated using simple POST commands to the web interface.
The examples in
Tabl e 2-19 use the free unix utility, wget commands. However, any program that
can send HTTP POST commands to the device should work.
2.6.1 Command Interface Post Commands
Note These commands require an authenticated session (a valid username and password to
work).
Table 2-19. Command Interface Post Commands
Device Action HTTP Post Command
a
Trigger relay (for configured delay) wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"test_relay=yes"
Place call to extension (example: extension 130) wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"call=130"
Place point-to-point call
b
(example: IP phone address = 10.0.3.72)
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"call=10.0.3.72"
Terminate active call wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"terminate=yes"
Force reboot wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"reboot=yes"
Test Audio button
wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"test_audio=yes"
Announce IP address wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/command.cgi" --post-data
"speak_ip_address=yes"
Play the "0" audio file wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_0=yes"
Play the "1" audio file wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_1=yes"
Play the "2" audio file wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_2=yes"
Play the "3" audio file wget --user admin --password admin --auth-no-challenge --quiet -
O /dev/null "http://10.0.3.71/cgi-bin/audioconfig.cgi" --post-data
"play_3=yes"