Product specifications
Table Of Contents
- Contents
- 1 Product Overview
- 2 Installing the VoIP V3 Indoor Intercom
- 2.1 Parts List
- 2.2 Intercom Components
- 2.3 Intercom Setup
- 2.4 Configure the Intercom Parameters
- 2.4.1 Factory Default Settings
- 2.4.2 Intercom Web Page Navigation
- 2.4.3 Log in to the Configuration Home Page
- 2.4.4 Configure the Device
- 2.4.5 Configure the Network Parameters
- 2.4.6 Configure the SIP Parameters
- 2.4.7 Configure the Nightringer Parameters
- 2.4.8 Configure the Sensor Configuration Parameters
- 2.4.9 Configure the Multicast Parameters
- 2.4.10 Configure the Audio Configuration Parameters
- 2.4.11 Configure the Event Parameters
- 2.4.12 Configure the Autoprovisioning Parameters
- 2.5 Upgrade the Firmware and Reboot the Intercom
- 2.6 Command Interface
- Appendix A: Mounting the Indoor Intercom
- Appendix B: Setting up a TFTP Server
- Appendix C: Troubleshooting/Technical Support
- Index
Operations Guide 930500E CyberData Corporation
54
Installing the VoIP V3 Indoor Intercom
Configure the Autoprovisioning Parameters
2. On the Autoprovisioning Configuration page, you may enter values for the parameters
indicated in Ta b le 2-17.
Web Page Item
Description
Autoprovisioning
Enable Autoprovisioning See Section 2.4.12.1, "Autoprovisioning".
Get Autoprovisioning from DHCP See Section 2.4.12.1, "Autoprovisioning".
Autoprovisioning Server (IP Address) See Section 2.4.12.1, "Autoprovisioning" (15 character limit).
Autoprovisioning Autoupdate
(in minutes)
Type the desired time (in minutes) that you want the
A
utoprovisioning feature to update (6 character limit).
Click the Sa
ve button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Re
boot button to reboot the system.
3. After changing the parameters, click the Save button.
Table 2-17. Autoprovisioning Configuration Parameters