User guide

CyberData SIP Paging Adapter Integration with MX (0000000400)
Revision 14 - August 2, 2013
© 2013 Zultys, Inc. No reproduction of distribution without permission
Page 8 of 25
Technical Publications
Device Type: Generic SIP
device.
Add Single Device:
Selected.
Click Next to proceed to the
next screen.
Profile: Select the Generic
SIP Device Profile created in
section 5.1.
Default Location: Select the
proper location from the
drop-down.
Device ID: Type the ID to
register CyberData
Equipment Ringing extension.
Contact: Not used.
SIP Proxy Password: Type
the password if required.
5.3 Create User and Assign User to the Device
After creating the device that will interface with CyberData Equipment, create a user and assign
the user to this device. This document assumes the reader is a ZCSE trained and a certified
technician. Since this process is covered by ZCSE training, it is considered to be outside the
scope of this document.