User guide

CyberData SIP Paging Adapter Integration with MX (0000000400)

Revision 14 - August 2, 2013

Page 6 of 25

Technical Publications

4 SIP Paging

4.1 How SIP Paging Works

SIP paging works as follows: the user places a SIP call to the CyberData Paging Adapter with an

auto answer flag and the CyberData Pagign Adapter answers the call requesting the user to

press “0” to create a page, the pager then in played over the CyberData Paging Adapter only.

No phones can be paged using this integration method.

4.2 Caveats of SIP Paging

 Session License is required.

 SBC Licenses are required if SIP paging is used with Remote phone(s).

 The user is relying on the paging capabilities of the CyberData Paging Adapter only no

phones will be included in the page.

 The Cyber Data paging Adapter cannot be included in the MX Paging Server

4.3 Advantages of SIP Paging

 Works with remote devices.

5 Creating a Generic SIP Device on the MX for night ring

capabilities

If using the night ring capabilities of the SIP Page Adapter, a generic SIP device and a user is

required to be created on the MX. For basic operation a Generic SIP device is created on the

MX and assigned to a user. The CyberData equipment will register as this Generic SIP Device,

this device is then invited by the MX when the extension is rang triggering the night ring

capabilities of the CyberData equipment. If not integrating the Night Ring capabilities of the

CyberData equipment this section may be skipped.

5.1 Create Generic SIP Profile

In order to create a Generic SIP Device, it is recommended to create a unique Generic SIP

Device Profile to control the codecs, functions and number of lines used by CyberData

Equipment, this device profile should be the same profile used with the paging device.

Make sure that the following options are selected.