User guide

CyberData SIP Paging Adapter Integration with MX (0000000400)

Revision 14 - August 2, 2013

Page 21 of 25

Technical Publications

memory6.DKtype = 24

memory6.Line = 0

memory6.Value = 234.2.1.1:10002

memory6.PickupValue =

10.3 Multiple Zones or Groups

Each new zone or group requires a unique IP address and Port. If you use the same port for all

zones but a unique IP paging will not work.

To add multiple listening groups, change the N value to a value between 1 and 10, and assign a

unique IP and port for each page group.

ListenAddressN.Label = Page_MC

ListenAddressN.IPAddress = [Unique IP]:[Unique Port]

11 Ceiling Speaker Integration

This section provides details on how to integrate CyberData Ceiling Speakers with the

CyberData SIP Paging Server and the Zultys MX. When deploying the CyberData Ceiling

speakers it is recommended to use DHCP. CyberData provides a “Discovery Utility” that can be

downloaded from their website (http://www.cyberdata.net/support/voip/discovery_utility.html)

to initially discover the IP address of the CyberData Ceiling Speakers. Using the CyberData

Discovery Utility to obtain the current IP address of the CyberData Ceiling Speakers login using

a web browser using the default username of “admin” and the default of “admin”. For more

information on using the discovery utility and basic setup of the CyberData equipment, please

refer to the operating manuals from CyberData. If not integrating CyberData Ceiling Speakers,

this section may be skipped.

11.1 Home Screen

After loging into the CyberData Ceiling Speakers using your favorite browser you are

immediately taken to the Home Screen which will display the following information