User guide

CyberData SIP Paging Adapter Integration with MX (0000000400)

Revision 14 - August 2, 2013

Page 13 of 25

Technical Publications

Current Settings:

Provides you with the current IP addressing of the

device, Mac address and serial number.

The home screen will also show the current

registration status, and features enabled on the

CyberData SIP Paging Adapter.

Import/Export Settings

Allows for Importing and Exporting settings of the

CyberData paging Adapter

Click on the Save button to save your

configuration settings.

Note: You need to reboot for changes to

take effect.

Click on the Reboot button to reboot

the system.

8.2 Device Configuration

On the device configuration screen you can configure several default options for the Paging

Adapter.

Beep on Initialization: Checked

Beep on Page: Checked

Enable lint-in to line-out loopback:

Unchecked

Enable relay on local audio: Unchecked

 When selected, the relay will be closed

any time that audio is played out of the

line-out/page port. This setting is for

legacy analog amplifiers that are often

connected to the page port. Analog

amplifiers will often have a noticeable

hum if they are turned on while there is

no audio being played. The relay closure