Product specifications

Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Operations Guide 930274I CyberData Corporation
28
3. After changing the parameters, click Save Settings. This updates the changed parameters and
reboots the V2 Speaker if appropriate.
4. Connect the V2 Speaker to the target network.
5. From a system on the same network as the V2 Speaker, open a browser with the new IP address
of the V2 Speaker.
DNS Server 1* Enter the DNS Server 1 address.
DNS Server 2* Enter the DNS Server 2 address.
Current Network Settings Shows the current network settings.
IP Address Shows the current Static IP address.
Subnet Mask Shows the current Subnet Mask address.
Default Gateway Shows the current Default Gateway address.
DNS Server 1 Shows the current DNS Server 1 address.
DNS Server 2 Shows the current DNS Server 2 address.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
Table 2-7. Network Configuration Parameters (continued)
Web Page Item Description