Product specifications

Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Operations Guide 930274I CyberData Corporation
27
2.3.4 Configure the Network Parameters
1. Click the Networking button to open the Network Configuration page (Figure 2-14).
Figure 2-14. Network Configuration Page
2. On the Network Configuration page, enter values for the parameters indicated in Table 2-7.
Table 2-7. Network Configuration Parameters
Web Page Item Description
Stored Network Settings Shows the settings stored in non-volatile memory.
IP Addressing* Select either DHCP IP Addressing or Static IP Addressing by
marking the appropriate radio button. If you select Static, configure
the remaining parameters indicated in
Table 2-7. If you select DHCP,
go to Step 3.
IP Address* Enter the Static IP address.
Subnet Mask Enter the Subnet Mask address.
Default Gateway Enter the Default Gateway address.