Product specifications

Installing the VoIP V2 Speaker
Configure the Speaker Parameters
Operations Guide 930274I CyberData Corporation
26
2. On the Device Configuration page, you may enter values for the parameters indicated in
Table 2-6.
3. After changing the parameters, click the Save button.
Table 2-6. Device Configuration Parameters
Web Page Item Description
Volume Settings
Use Digital Volume Control When selected, you can bypass the analog volume knob on the front
of the speaker. The volume level will only be determined by the digital
Speaker Volume setting on the Device Configuration page.
Speaker Volume Type the desired speaker volume level into this field
(1 character limit).
Relay Settings
Activate Relay with DTMF Code When selected, the relay can be activated with a DTMF code.
DTMF Activation Code Type the desired DTMF activation code (25 character limit).
DTMF Activation Duration (in
seconds)
Type the desired DTMF activation duration (in seconds) (1 character
limit).
NOTE: A DTMF activation duration of 0 will toggle the relay indefinitely
or until the activation code is sent again
Activate Relay During Ring When selected, the relay will be activated for as long as the call is
active.
NOTE: When the phone is set to Auto Answer, it will not ring and this
option does nothing.
Activate Relay During Night Ring Check this box to activate the relay for as long as a Night Ring tone is
ringing.
Activate Relay While Call Active When selected, the relay will be activated for as long as the call is
active.
Miscellaneous Settings
Beep on Initialization When selected, you will hear a beep when the speaker initializes.
Auto-Answer Incoming Calls When selected, the device will automatically answer incoming calls.
When Auto Answer is Off, the device will play a ringtone through the
speaker until someone presses the button.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Test Audio button to do an audio test. When the Test
Audio button is pressed, you will hear a voice message for testing the
device audio quality and volume.
Click on the Test Relay button to do a relay test.
Click on the Reboot button to reboot the system.