Product specifications

Installing the VoIP V2 Speaker
Device Configuration
Operations Guide 930274I CyberData Corporation
17
2.2.4 Confirm the IP Address and Test the Audio
2.2.4.1 Reset Test Function Management (RTFM) Switch
When the speaker is operational and linked to the network, use the Reset Test Function
Management (RTFM) switch (
Figure 2-9) on the speaker face to announce and confirm the speaker’s
IP Address and test that the audio is working.
Note Using the RTFM switch will lock the digital volume level to 4 and disable the analog
volume control dial.
Figure 2-9. RTFM Switch
To announce a speaker’s current IP address, press and release the RTFM switch within a five second
window.
Note The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
Note Pressing and holding the RTFM switch for longer than five seconds will restore the speaker
to the factory default settings.
RTFM switch