Product specifications

Installing the VoIP V2 Loudspeaker Amplifier
Configure the Loudspeaker Amplifier Parameters
Operations Guide 930360D CyberData Corporation
23
2. On the Device Configuration page, you may enter values for the parameters indicated in
Tab le 2-11.
Table 2-11. Device Configuration Parameters
Web Page Item Description
Volume Settings
Speaker Volume (0-9) Type the desired Loudspeaker Amplifier volume level into this field
(range is 0 - 9).
Line-In Volume (0-9) Type the desired line-in volume level into this field (range is 0 - 9).
Relay Settings
Activate Relay with DTMF Code When selected, the relay can be activated with a DTMF code.
DTMF Activation Code Type the desired DTMF activation code (25 character limit).
DTMF Activation Duration (in
seconds)
Type the desired DTMF activation duration (in seconds)
(1 character limit).
Activate Relay During Ring When selected, the relay will be activated for as long as the phone is
ringing.
NOTE: When the phone is set to Auto Answer, it will not ring and this
option does nothing.
Activate Relay During Night
Ring
When selected, the relay will be activated for as long as a night ring
tone is playing.
NOTE: When the phone is set to Auto Answer, it will not ring and this
option does nothing.
Activate Relay While Call Active When selected, the relay will be activated for as long as the call is
active.
Miscellaneous Settings
Two Speakers Connected Select Yes if two speakers are connected to the Loudspeaker
Amplifier. Select No if two speakers are not connected to the
Loudspeaker Amplifier.
Beep on Initialization When selected, you will hear a beep when the Loudspeaker Amplifier
initializes.
Auto-Answer Incoming Calls When selected, the Loudspeaker Amplifier automatically answers
incoming calls.
Play Ringback Tone Check this box to enable the device to play a ringtone while the remote
device is ringing.
Beep Before Page Enable/Disable the tone (beep) before each page.
Enable Line In When selected, whatever audio source that you have selected (mp3
player, internet stream, etc.) will be played.
Note: The line in audio will be treated as low priority audio that will only
play if there is no other audio playing. When higher priority audio is
playing, the line in audio will be muted.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.