Product specifications

Installing the VoIP V2 Paging Amplifier
Configure the Paging Amplifier Parameters
Operations Guide 930363G CyberData Corporation
18
2.3.1 Paging Amplifier Web Page Navigation
Ta b le 2-9 shows the navigation buttons that you will see on every Paging Amplifier web page.
Web Page Item Description
Link to the Home page.
Link to the Update Firmware page.
2.3.2 Log in to the Configuration Home Page
1. Open your browser to the Paging Amplifier IP address.
Note If the network does not ha
ve access to a DHCP server, the device will default to an IP
address of 10.10.10.10.
Note Make sure tha
t the PC is on the same IP network as the Paging Amplifier.
Note You may als
o download CyberData’s VoIP Discovery Utility program which allows you to
easily find and configure the default web address of the CyberData VoIP products. 

CyberData’s VoIP Discovery Utility program is available on the VoIP V2 Paging Amplifier
product page a
t:
http://www.cyberdata.net/support/voip/discovery_utility.html
The Paging Amplifier ships in DHCP mode. To get to the Home page, use the discovery utility to
scan for the device on the network and open your browser from there.
2. When prompted, use the following default W
eb Access Username and Web Access
Password to access the Home Page (Figure 2-16):
Web Access Username: admin
Web Access Password: admin
Table 2-9. V2 Paging Amplifier Web Page Navigation