Instruction manual

4. OPERATING CONTROLS

PTZ Camera Function Part

PRESET : It is used to set the Preset function.

TOUR : It is used to set the Tour function.

PTRN : It is used to set the Pattern function.

SCAN : It is used to set the Auto Scan function.

MENU : It is used to select the Set up Menu. It is also used to

execute or close Menu.

HOME : It is used to set the Home function.

QMAP : Quick Mapping function. It is used to call a User

Defined function.

GLB : It is used to call the Global function.

FILP : Rotate PAN by 180 degree.

ZOOM/FOCUS/IRIS Part

ZOOM In/Out : It is used to enlarge or reduce images by

adjusting the lens.

FOCUS Near/Far : It is used to adjust the Focus.

IRIS Open/Close : It is used to adjust the IRIS.

Joystick Part

User can pan/tilt cameras by moving Joy Stick up/down and

twist.

Once user enters Menu, Joy Stick can be used to scroll the

sub-menu.

LCD Part

① Indication of DVR ID

② Indication of CAM ID

③ Status Indication of INPUT

④ Indication of MON ID

⑤ Status Indication of PRST/TOUR/PTRN/SCAN/HOME

⑥ Indication of Protocol/Baud Rate

⑦ Status Indication of DVR

① DVR:001 ② CAM:0001

③ INPUT? : ④ MON:001

⑤ PRST:319 ⑥ CS-I:9600

⑦ DISPLAY