dedicated KVM switch and rackmount screen technology User Manual Matrix Cat6 KVM MU-IP1613 / 1624 MU-IP3213 / 3224 Matrix Cat6 KVM MU-1602 / 1603 / 1604 MU-3202 / 3203 / 3204 751 Designed and manufactured by Austin Hughes UM-CV-751-MUKVM-Q413V5 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part 1 > Matrix Cat6 1.1 1.2 1.3 1.4 1.5 1.6 1.7 KVM MU-IP1613 MU-IP1624 MU-IP3213 MU-IP3224 Package contents KVM port & Cat6 dongle connection IP, Remote & Local console connection IP console setting KVM Cascade Specifications Resolution Support Information P.1 P.2 P.3 - 4 P.5 P.6 P.7 P.8 < Part 2 > Matrix Cat6 KVM 2.1 2.2 2.3 2.4 2.5 2.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately.
Part 1. Matrix Cat6 KVM < 1.
< 1.2 > KVM port & Cat6 dongle connection Matrix Cat6 IP KVM USB Servers DG-100SD DVI-USB dongle CAT 5 / 6 cable max. 40 meters USB DVI-D Cat6 KVM port PS/2 Servers USB Servers PS/2 DG-100S VGA-USB dongle DG-100 VGA-PS/2 dongle VGA CAT 5 / 6 cable max.
< 1.3 > IP, Remote & Local console connection Matrix Cat6 IP KVM Inter net Network device hub or router CAT 5 / 6 cable max. 100m Remote USB console Receiver CAT 5 / 6 cable max. 150m 2 Local USB console Remote Cat6 Console 1 1 Inter net Network device hub or router CAT 5 / 6 cable max. 100m UM-CV-751-MUKVM-Q413V5 P.3 www.austin-hughes.
How to use a receiver to connect a remote console Receiver Local Computer Matrix Cat6 IP KVM Monitor Remote I/O Front Rear Power USB K/B Local Mouse Remote Button to PC Button to KVM switch The receiver provides a hotkey function for remote console. Please refer to P.19 Monitor Remote Console Local computer ( Optional setup ) CE-6 Combo KVM cable VGA cable Cat6 cable up to 150m 12V DC Power Adapter Front Rear UM-CV-751-MUKVM-Q413V5 P.4 www.austin-hughes.
< 1.4 > IP console setting Matrix Cat6 IP KVM After the cable connection, please take the following steps to configure the IP KVM : 1. Download IPKVMsetup.exe from the link: www.austin-hughes.com/support/utilities/cyberview/IPKVMsetup.exe 2. Double click IPKVMsetup.exe to configure the IP KVM by device setup as below. 3. Click Refresh Device to search the connected IP KVM 4. Select the M.A.C. address, which you want to setup, then click Query Device 5. Enter Super user login. The default is super 6.
< 1.5 > KVM Cascade ■ ■ Matrix Cat6 IP KVM Cascade up to 8 levels, 256 servers Cascading multiple KVM with CMC-8 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of MU-1602 / MU-3202 or M-802 / M-1602. When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).
< 1.
< 1.
UM-CV-751-MUKVM-Q413V5 P.9 www.austin-hughes.
Part 2. Matrix Cat6 KVM < 2.
Matrix Cat6 KVM Local Console MU-1602 Remote Console 1 Power out Cascade in MU-3202 Local Console MU-1603 Remote Console 1 Power Remote-2 out Cascade in MU-3203 Remote-3 Local Console MU-1604 Remote Console 1 Power Remote-2 out Cascade in MU-3204 UM-CV-751-MUKVM-Q413V5 P.11 www.austin-hughes.
< 2.2 > KVM port & Cat6 dongle connection Matrix Cat6 KVM USB Servers DG-100SD DVI-USB dongle CAT 5 / 6 cable max. 40 meters USB DVI-D Cat6 KVM port PS/2 Servers USB Servers PS/2 DG-100S VGA-USB dongle DG-100 VGA-PS/2 dongle VGA CAT 5 / 6 cable max.
< 2.3 > Local console & remote console connection Matrix Cat6 KVM Receiver Remote USB console 3 Receiver Remote USB console 1 Receiver Remote USB console 2 CAT 5 / 6 cable max. 150m CAT 5 / 6 cable max. 150m Remote Cat6 Console 3 Local USB console Remote Cat6 Console 1 Remote Cat6 Console 2 CAT 5 / 6 cable max. 150m UM-CV-751-MUKVM-Q413V5 P.13 www.austin-hughes.
How to use a receiver to connect a remote console Receiver Local Computer Matrix Cat6 KVM Monitor Remote I/O Front Rear Power USB K/B Mouse Local Button to PC Remote Button to KVM switch The receiver provides a hotkey function for remote console. Please refer to P.19 Monitor Remote Console Local computer ( Optional setup ) CE-6 Combo KVM cable VGA cable Cat6 cable up to 150m 12V DC Power Adapter Front Rear UM-CV-751-MUKVM-Q413V5 P.14 www.austin-hughes.
< 2.4 > KVM Cascade ■ ■ Matrix Cat6 KVM Cascade up to 8 levels, 256 servers Cascading multiple KVM with CMC-8 cascade cable. Cascaded KVMs from level 2 to 8 must be the models of MU-1602 / MU-3202 or M-802 / M-1602. When multiple matrix KVMs cascade together, the master KVM at level 1 will take all control of other slave KVM switches (e.g. level 2 to 8).
< 2.
< 2.
Part 3. Usage Matrix Cat6 KVM Usage 3.1 KVM Button Power ON ■ Turn off all servers and KVM switches ■ Make sure all cables / connectors are properly connected ■ Recommend Power ON sequence is monitor, KVM switch finally computer Front Panel - Port LED Indications 16 ports Bank no. PC port LEDs Channel button Bank button 32 ports Bank no.
3.2 Password Matrix Cat6 KVM Usage The password is enabled by default, the default password is “00000000” eight zeros (Do not use “0” on number pad) ■ Enable password 1. Press the KVM hotkey Scroll Lock + Scroll Lock + U 2. Logout the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P 3. In SUPERVISOR level, enter “00000000” eight zeros in user name & password field (Do not use “0” on number pad) 4.
3.
3.4 KVM Hotkey & Remote Console Hotkey Matrix Cat6 KVM Usage Local Console Hotkey Function Scroll Lock + Scroll Lock + Space Bar Calling OSD menu Right-button mouse + Esc Calling OSD menu Scroll Lock + Scroll Lock + Switch to previous port Scroll Lock + Scroll Lock + Switch to next port Scroll Lock + Scroll Lock + PgUp / PgDn Switch to previous bank or next bank Scroll Lock + Scroll Lock + Bank no. + Port no.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2013 Austin Hughes Electronics Ltd. All rights reserved. UM-CV-751-MUKVM-Q413V5 www.austin-hughes.
