dedicated KVM switch and rackmount screen technology User Manual N-117 / N-119 1U 17” / 19” LCD Console Drawer Options : - AV / DVI-D / Audio - Full range KVM - DC power Designed and manufactured by Austin Hughes UM-CV-N117-Q411V2 www.austin-hughes.
Legal Information First English printing, October 2002 Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. We are not liable for any injury or loss that results from the use of this equipment. Safety Instructions Please read all of these instructions carefully before you use the device. Save this manual for future reference.
Contents < Part 1 > N-117 1.1 1.2 1.3 1.4 1.5 1.6 1.7 N-119 P.1 P.2 P.3 - 6 P.7 P.8 P.9 - 10 P.11 Package Contents Structure Diagram & Dimension Installation Connection to External KVM Switch or Server On-screen Display Operation ( OSD ) LCD / Keyboard / Mouse Specification Options : DVI-D / BNC + S-Video / Audio : DC Power For KVM options, please download the links below according to the KVM series and models : For Matrix Cat6 KVM www.austin-hughes.com/support/usermanual/cyberview/UM-CV-MUKVM-KIT.
Before Installation ■ It is very important to mount the equipment in a suitable cabinet or on a stable surface. ■ Make sure the place has a good ventilation, is out of direct sunlight, away from sources of excessive dust, dirt, heat, water, moisture and vibration. Unpacking The equipment comes with the standard parts shown in package content. Check and make sure they are included and in good condition. If anything is missing, or damaged, contact the supplier immediately. < Part 1 > N-117 / 119 < 1.
< 1.2 > Structure Diagram & Dimension N-117 / 119 1 5 2 6 3 7 8 4 1 Carry handle to release the 2-pt lock 5 Micro switch for screen auto power off 2 LCD interchangeable module kit 6 Membrane switch (KVM option) 3 “One Man” Installation Slides 7 Keyboard interchangeable module kit 4 LCD membrane 8 Mouse interchangeable module kit Product Dimension (W x D x H) Packing Dimension (W x D x H) Net Weight Gross Weight N-117 series 441.6 x 650 x 44.3 mm 17.4 x 25.6 x 1.
< 1.3 > Installation - How to install One Man Installation Slides Step Rear side Right bracket Front side 1 ■ Attach the left and right mounting bracket to rack 19” mounting rails. ■ ■ Adjust the rear mounting bracket to fit your rack. M6 screw and cup washer x 6 pcs included. Caution : Leave the screws slightly loose, until you complete the installation in step 4 Left bracket Right front Left front Step Mounting bracket ■ ■ ■ ■ 2 Pick up the LCD console drawer.
< 1.3 > Installation- How to install L-bracket Step N-117 / 119 1 ■ Install left & right rear L-brackets with two fasteners shown above. ■ Leave the fasteners slightly loose. Step 2 ■ Measure the depth of the front and rear mounting rails. ■ Align each rear L-bracket to a suitable length and tighten the fasteners. Step ■ 3 Fix the LCD console drawer into the rack. M6 mounting screws & cage nuts are not provided. UM-CV-N117-Q411V2 P.4 www.austin-hughes.
< 1.3 > Installation - How to Use the Slides Figure 1. L ■ A black arrow release button is located on the front of each slide. (shown in Figure 1). Figure 2. ■ Pull and hold the black arrow button on either side of the LCD console drawer to unlock. (shown in Figure 2). L I I Figure 3. ■ Push the LCD console drawer into the rack. (shown in Figure 3). Caution : Keep your fingers away from the slide stop UM-CV-N117-Q411V2 P.5 www.austin-hughes.
< 1.3 > Installation- How to use the drawer UM-CV-N117-Q411V2 P.6 N-117 / 119 ■ Pull the tab on the front handle and gently slide out the drawer. ■ Flip up the LCD to a suitable angle. ■ Operate the LCD console drawer. www.austin-hughes.
< 1.4 > Connection to PS/2 or USB Server LCD console drawer LCD console drawer CE-6 Combo KVM cable CE-6 Combo KVM cable PS/2 server USB server < 1.4 > Connection to external KVM LCD console drawer LCD console drawer CE-6 Combo KVM cable CE-6 Combo KVM cable CE-6 KVM Cable PS/2 console KVM KVM USB console KVM Caution : The LCD console drawer is hot-pluggable, but components of connected devices, such as the servers and KVM switch, may not be hot-pluggable.
N-117 / 119 < 1.
< 1.6 > LCD / Keyboard / Mouse Specification Item Description LCD Manufacturer 17" TFT 19" TFT 1280 x 1024 1280 x 1024 250 250 Color Support 16.7 M 16.7 M Contrast Ratio (typ.) 1000:1 1000:1 Viewing Angle (H/V) 160˚ x 160˚ 160˚ x 160˚ 338 x 270 376 x 301 5 5 50,000 50,000 Diagonal Size Max. Resolution Brightness (cd/m²) Active Area (mm) Response Time Tr + Tf (ms) LCD Panel MTBF (hrs) Analog RGB, 0.7Vp-p VGA Signal Input Sync.
N-117 / 119 < 1.6 > LCD / Keyboard / Mouse Specification Ne Nb N keyboard integrated with touchpad N keyboard integrated with trackball Key force 55 ± 5g Travelling distance 3 ± 0.
< 1.7 > Options : DVI-D / BNC + S-Video / Audio / DC power ■ DVI-D Option Option includes 1 x 6ft DVI-D cable DVI-D KVM ■ BNC + S-Video Option Option includes 1 x 6ft S-Video cable S-Video BNC Audio Option ■ ■ KVM Audio input is 35mm audio plug The speaker is sharing the same power with LCD.
The company reserves the right to modify product specifications without prior notice and assumes no responsibility for any error which may appear in this publication. All brand names, logo and registered trademarks are properties of their respective owners. Copyright 2011 Austin Hughes Electronics Ltd. All rights reserved. UM-CV-N117-Q411V2 www.austin-hughes.
