User manual

Cyber Control 2 V Dealing with Fixtures
6. Multiple Universes
Cyber Control 2 supports multiple universes and interfaces. The universes and interfaces can be
modified within the output tab of the starting parameters. The software is set to automatically select
your interfaces by default. Uncheck auto detection to set this up manually. Products can be selected
here(1).
Some interfaces have 3 universes. Each universe in the software can be patched to one of the interface
outputs, or the DMX output universe can be swapped with a DMX input universe so the show can be
triggered from a DMX desk(2).
If you have a Cyber Control 2 Cyber Pro interface connected, you can also output out of a variety of
other products including the Cyber Control Easy Stand Alone IP interface, the Cyber Control STICK, or
through an art-net protocol interface using the ethernet socket on your computer. You can change the
order of your interfaces by dragging. You can delete an interface by dragging off the screen.
ArtNet
If you have an Economy or Cyber Pro interface connected. You can
output additional universes from your computers Ethernet socket using a protocol which sends DMX
over a network. This protocol is called ArtNet.
Most of the time, your fixtures won't be able to read the ArtNet protocol and you will have to convert it to
DMX using an ArtNet to DMX converter. These can usually convert several universes. We can provide
a single universe converter with our SLESA-IP1 interface.
Page 76