User manual

Cyber Control 2 IV EasyTime Effects
The gradient type can be changed:
-Auto gradient: Automatically fades between the blocks before and after the effect
-Linear(1): Fades between 2 points on the color wheel (there will be a dip in the brightness as the
marker passes through the center of the wheel)
-Shortest(2): Fades around the color wheel in the shortest direction
-Longest(3): Fades around the color wheel in the longest direction. This is useful when creating rainbow
effects all around the color wheel by setting the start and end colors as the same.
3. Curve
With the curves effect, basic mathematical forumlas can be used to adjust a channel. In
this example, the red color level is being adjusted with a sinus wave. Curve types can be selected
here(1).
- Adjust the amplitude to stretch the wave(2)
- Move the wave backwards and forwards by adjusting the phase and adjust the offset to move the
wave up or down(3)
- Change the frequency of the wave by adjusting the ratio, this will speed up your pattern(4)
- Add phasing here(5). Remember that for phasing to work correctly, the software must be told which
order your fixtures are positioned. For more information on phasing, see the EasyTime Phasing topic.
Page 56