User manual

Cyber Control 2 III Programming
Using the Channel Window
The button editor allows you
to modify DMX channels in a variety of different ways. Before editing your scene, it is important to make
sure that each DMX channel is assigned to the correct function. To assign a channel function, drag one
of the icons from the left onto the top of a channel. Hold ctrl to drag onto multiple channels at once.
Off: Deactivates the channel
On: Allows manual adjustment of the channel fader
Dimmer: Allows manual adjustment of the channel fader. The channel will fade between the set value
and 0 if the button dimmer dial is moved
Dimmer Min-Max: Allows a minimum and maximum value to be set. The channel will fade between the
minimum and maximum values if the button dimmer dial is moved. Select the "Min" checkbox at the
bottom of the fader to set the minimum value
Easy Time: Allows the channel to be edited using the Easy Time tool
Easy Step Fade: Allows the channel to be edited using the Easy Step tool
Easy Step Cut: Allows the channel to be edited using the Easy Step tool but ignores any fade
commands. This is useful for a gobo or shutter channel
-To jump to a particular function, right click here(1) and select the function.
-To jump to a particular preset (eg. gobo holes, color red, shutter closed ), right click here(2) and select
the preset.
Page 37