User manual

Cyber Control 2 III Programming
Cycle Button Settings
The cycle button settings allow you to determine what the button will do when it is
triggered within the cycle.
Type of action- determines if the button is switched ON, switched OFF or has a button dial/live
MODIFICATION applied
Start time- manually set the time at which the button is triggered
Go- this will pause the cycle when the button is triggered. This is useful if you are controlling a
pre-programmed show and you want to manually skip through a cycle list (as with a traditional lighting
console)
Button Dials- allows you to change the Dimmer, Speed, Size and Phase dials of the button
Live- Allows you to add and remove fixtures from the button
Page 35