EliteSuite LCD Keypad User Manual
PUBLICATION INFORMATION 5152 R First Publication 7075 R Update to User Programming & Options Selection EliteSuite™ User Manual
CONTENTS INTRODUCTION ...................................................... 1 OPERATION ............................................................ 2 INDICATOR LIGHTS .................................................................... 2 VISUAL DISPLAY......................................................................... 3 AUDIBLE TONE ........................................................................... 3 ALARM MEMORY .........................................................................
INTRODUCTION Your suite has been equipped with the EliteSuite™ Security System. The EliteSuite™ Security System will give you peace of mind by providing reliable security protection. The EliteSuite™ System is an advanced technology security system specifically designed to enhance the functionality of condominium and apartment security with flexible local monitoring and offsite communication.
OPERATION The following section provides you with information on how to use the EliteSuite™ keypad. When the text [USER CODE] is shown this indicates that you are required to enter your user code. The default Master Code to gain access to your system is . This code MUST be changed, see section 0 on page 7 on how to program user codes. Many of the features and options must be enabled by the installation company or property manager.
Power / Trouble Indicator When FLASHING, indicates that there is a trouble condition present. When ON, the system is powered and operating normally. If there is a complete power failure this indicator will be OFF. Ready Indicator When ON, the system has all zones closed and is ready to be armed. When OFF, one or more zones in the system are open and the system cannot be regular armed. Armed / Alarm Indicator When FLASHING, the system is in alarm and you need to enter your user code.
new status/mode, the keypad generates a series of four audible tones. Rejection Tone When the system times out or when an operation is incorrectly entered on the keypad, it will generate a continuous audible tone for three seconds. ALARM MEMORY All zones that generate an alarm will be stored in the memory of the EliteSuite™ Keypad. If an alarm has occurred on your system, the display will scroll between the default display and the following screen: Alarm Memory [MEMORY] To view Viewing Alarm Memory 1.
TROUBLE DISPLAY The EliteSuite™ Security System continually monitors five system trouble conditions that can occur on your system. All trouble conditions are cleared automatically by the system when the fault is rectified. It is recommended that you inform your property manager or security company if a trouble condition occurs. When a trouble condition occurs the EliteSuite™ keypad can be programmed to generate an audible tone every 120 seconds.
Host Comms Communication with the host system is currently offline. This is possibly due to maintenance or a system fault. Contact the property manager or security installation company if the problem persists. Zone Fault A zone in the system is faulty or the wiring has been damaged. Contact the property manager or security installation company to arrange for your system to be serviced. Cover Tamper The cover of the EliteSuite™ system is open and may have been damaged.
USER CODES User Codes are personal identification numbers that allow you to enter certain programming modes, arm or disarm your EliteSuite™ system as well as activate or deactivate home automation functions. The EliteSuite™ system supports up to eight user codes. MASTER CODE By default User 01 is a master code for your system. A master code can perform the arm or disarm functions and modify and delete any user code, change user options and modify user card numbers.
USER SETUP Entering the User Setup Menu 1. Press the menu key then enter your [USER CODE]. 2. Use the up and down keys to scroll to the User Setup menu and press enter, or press to access the menu directly. The display will show: Select user To modify [01] 3. You can now use the up and down keys to scroll the user(s) in the system. Press the enter key to program to enter the User Setup menu for the user number that is displayed.
From the User Setup Menu (see section 0 to access), press or use the up and down keys to scroll to the Modify Code option and press the enter key. Select PIN [****] Using the keys, enter the new code for the user and then press the enter key. The EliteSuite™ keypad will then prompt for confirmation of the user code. Repeat the user code and press the enter key to confirm.
MODIFYING USER OPTIONS The User Option menu contains options for arming, disarming and door latching for the optional Card Reader interface. If your EliteSuite™ system is not equipped with a Card Reader interface, changes to these options will have no effect. From the User Setup Menu (see section 0 to access), press or use the up and down keys to scroll to the Options menu and press the enter key. Modifying User Options Use the up and down keys to scroll through the available options.
6 Disabled allows the user code to arm and disarm the EliteSuite™ system. User Can Modify Other Users: N Option 2 – Master User 5 Enabled allows the selected user to access the User Setup menu and modify codes, card numbers and options of all other users. 6 Disabled prevents access to the User Setup menu.
presented by a Single Badge Disarm enabled user. Each user may have only 1 of the following Triple Badge options enabled at any time. Enabling one of the triple badge user options will automatically disable all other Triple Badge user options for you.
their card 3 times in quick succession. 6 Disabled prevents triple card presenting from toggling the door lock. 3 Badge Latch Door 2 Hours: N Option 6 – Triple Badge Latch 2 Hours For Card Reader Interface Equipped Systems Only 5 Enabled allows the selected user to hold a door open for 2 hours upon presenting their card 3 times in quick succession. 6 Disabled prevents triple card presenting from latch opening the door.
3 Badge Latch Door 8 Hours: N Option 8 – Triple Badge Latch 8 Hours For Card Reader Interface Equipped Systems Only 5 Enabled allows the selected user to hold a door open for 8 hours upon presenting their card 3 times in quick succession. 6 Disabled prevents triple card presenting from latching the door open. Any user that has a Triple Badge Latch Option enabled may present their card three times while the door is latched open to cancel the latching and immediately lock the door.
has been installed, each user can be assigned a unique card number that is stored on a proximity card or tag device. If you wish to obtain these devices, please contact your property manager or security installation company. Programming User Card Numbers From the User Setup Menu (see section 0 to access), press or use the up and down keys to scroll to the Add Card option and press the enter key.
enter key to confirm. The EliteSuite™ keypad will then show the updated Card Number, press the enter key again to confirm. Deleting a User Card To delete a user Card Number, follow the same procedure to program the Facility and Card Number, and when the old number is displayed, press the force key to clear the Facility or Card Number. Changing a User Card To change a user code, overwrite the current Facility and Card Number with the new value and then press the enter key.
ARMING/DISARMING To take full advantage of your EliteSuite™ System, you should familiarize yourself with the different arming methods. EXIT DELAY After entering a valid arming sequence the exit delay time will provide you with enough time to exit the protected area before the system arms. The keypad will generate a beepbeep tone repeatedly during the exit delay period. The tone will increase in frequency to indicate that only ten seconds remains.
2. Enter your [USER CODE]. REGULAR ARMING Regular arming arms your system. Arming Your System 1. Check that the system is ready to arm and all zones are closed (Ready Indicator is Green). 2. Enter your [USER CODE]. 3. The exit delay will start and you can now leave your premises. Quick arming can be used by pressing and holding the arm key. This option MUST be enabled by your property manager or installation company. See the configuration section on page 26.
Instant Arming Your System 1. During the EXIT DELAY press and hold the key for 2 seconds. The system will instant arm all zones, any zone will trigger the alarm immediately. Fast Stay Arming 1. To fast stay arm your system press and hold the stay key for two seconds. Switching From Stay To Regular/Force Armed 1. If you need to leave your premises and want to arm the system fully you can use the fast exit arming method.
To fast force arm your system press and hold the force key for two seconds. This option MUST be enabled by your property manager or installation company. Refer to the system configuration table on page 26. BYPASSING ZONES Bypassing zones allows you to program the alarm system to ignore (deactivate) specified zones the next time the system is armed. For example, you may wish to bypass certain zones when workers are renovating part of your establishment.
manually re-program the bypass entries every time you arm the system if you are always bypassing the same zone(s). 1. Press the bypass key then enter your [USER CODE]. 2. Press and hold the bypass key for 2 seconds the last settings will be loaded. You may change these settings if required. 3. Press the enter key to store the bypass settings and exit. 4. Press the clear key to exit without making changes.
SPECIAL FEATURES The EliteSuite™ System offers many unique features. CHIME ZONES A chime enabled zone will generate an audible tone every time that the zone opens. The chime feature is excellent for a front door. Chiming Zones 1. Press the menu key then enter your [USER CODE]. 2. Use the up and down keys to scroll to the chime menu or press . 3. You can now use the up and down keys to scroll the zone(s) in the system. Press the enter key to toggle the chime option for the selected zone.
will continue to generate a tone when a key is pressed and to provide audible confirmation. Disabling Audible Output 1. Press and hold the clear key. 2. Keypad will generate one long audible tone (rejection tone) to signify that the audible output is disabled. To enable the audible output repeat the above steps, the keypad will generate four audible tones to indicate that the audible output has been enabled.
Once all messages are acknowledged the new message indication display will not be shown. Any new messages will overwrite the oldest message that is present. Erasing Messages To completely remove a message from memory, press the force key while viewing the message. PANIC ALARM The EliteSuite™ system can provide three panic alarms that can immediately generate an alarm after simultaneously pressing and holding two specific buttons for three seconds.
A delayed fire zone will prevent unnecessary reporting of false alarms allowing you to reset the fire alarm before a report is sent. If there is no fire condition, contact your property manager or security company immediately to avoid an unnecessary response. A delayed fire zone will automatically cancel if the smoke detector is reset within 30 seconds. Pressing any key on the keypad during the first 30 seconds will silence the alarm for 90 seconds.
CONFIGURATION The EliteSuite™ system has many options that are enabled by your installer. The following lists the options and how your system is configured. Use this location to write your user names and any information about your system. ZONE DESCRIPTION The following lists the zones in your system and how each zone is configured. ZONE 01 02 03 04 ZONE NAME ZONE 1 ZONE 2 FORCE STAY BYPASS 5 5 5 5 5 5 FIRE ZONE The following lists the fire zone configuration for your system.
ONE KEY ARMING The following lists the one key arming method(s) that are enabled on your system. Enabled Disabled Regular Arming 5 Stay Arming 5 Force Arming 5 Instant Arming 5 PANIC KEYS The following lists the panic key configurations that are enabled on your system. Enabled Disabled [1] + [3] Panic Alarm 5 [4] + [6] Medical Alarm 5 [7] + [9] Fire Alarm 5 TIMERS Your entry time is programmed to be _030_ seconds.
USERS The following table should be used to keep a record of the users programmed in your EliteSuite™ system. Record the name of the user only. Do not write the user code. All users can arm and disarm the system.
WARRANTY The Seller warrants its products to be free from defects in materials and workmanship under normal use for a period of one year. Except as specifically stated herein, all express or implied warranties whatsoever, statutory or otherwise, including without limitation, any implied warranty of merchantability and fitness for a particular purpose, are expressly excluded.
NOTES _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ __
NOTES _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ __
Unit C, 6 Ascension Place, Mairangi Bay, P.O. Box 302-340 North Harbour, Auckland, New Zealand. Phone: +64 (9) 476 7124 y Fax: +64 (9) 476 7128 www.integratedcontroltechnology.
