Installation Guide

9 | C y b e r - R a i n X C I S m a r t I r r i g a t i o n C o n t r o l l e r U s e r G u i d e
The access point LED lights represent the following:
Yellow Illuminates when the access point is connected to power. This light should stay on as long as the access point is connected to a power supply.
White Illuminates when the access point is connected to Cyber-Rain server. This light should stay on as long as the access point is connected to your
router and has internet access.
Blue Number of lights illuminated indicates the signal strength of communications between the access point and the controller.
 0-1 light indicates no/low signal strength.
 2-3 lights indicate moderate/good signal strength.
 4 lights indicate excellent/maximum signal strength.
(Note: The blue LEDs will only be lit when the access point is sending or receiving information to or from a controller.)
Green Illuminates when information is being sent from the access point to the controller. It is normal for this to periodically turn on as the access point
needs to periodically send information to the controller. This light will be on in conjunction with the blue lights.
Red Illuminates when information is being sent from the controller to the access point. This will also turn on periodically. This light will also be on in
conjunction with the blue lights.