Installation Guide

83 | C y b e r - R a i n X C I S m a r t I r r i g a t i o n C o n t r o l l e r U s e r G u i d e
3. Event Log: This panel shows you a detailed log of the activity of every controller in your selected site. It lists each item in date order by default, but it can
be sorted by clicking any of the column names on the top of the log. It displays the date and time of the event, followed by the controller name that the
event occurred on, which zone number was running at the time of the event, the type of event that occurred, the packet type, a description of the
event, the value (if applicable), what the unit is of the value (if applicable) and whether the event was due to a scheduled or manual run.
Typical events include:
 Zone Run: The zone name and the duration in seconds of the watering are shown.
 NORMAL CURRENT EVENT: The observed current (in milliamps) is shown.
 LINE FILL EVENT: Indicates the flow rate (in GPM) after the fill time is complete.
 ALL ZONES OFF: Occurs whenever a zone is shut off.
 Rain/Flow Sensor Holds: Rain sensor and flow sensor holds and the time and date they occur.