Installation Guide

59 | C y b e r - R a i n X C I S m a r t I r r i g a t i o n C o n t r o l l e r U s e r G u i d e
b. DI Type: Select this option if you have a “Data Industrial” impeller type flow sensor. The K Value and Offset parameters should be provided with your
meter and allow you to calibrate the system to your specific flow sensor.
6. Set Thresholds: The thresholds are used for setting the alert levels of too much or too little watering flowing through your valves. If Cyber-Rain detects
overflow, it will shut off your watering and send you an email. If it detects underflow, it will send you an email but keep watering. Thresholds are set as
a percentage difference from normal flow. For example, if the normal flow for a valve is 10 GPM and the overflow threshold is set to 20%, a flow rate of