Installation Guide

52 | C y b e r - R a i n X C I S m a r t I r r i g a t i o n C o n t r o l l e r U s e r G u i d e
On the Run Status panel you can also perform a manual zone run. Click on the Manual Run button (A). Move the slider bar at the top of the menu (B) to
change the duration of the cycle. Check the box to the left of each zone name (C) to activate the corresponding zone. The Check All and Clear All buttons
(D) on the bottom allow you to quickly select or deselect all zones. Click the Run/Cycle button (D) to begin the manual run.
A
B
C
E
D