Installation Guide

51 | C y b e r - R a i n X C I S m a r t I r r i g a t i o n C o n t r o l l e r U s e r G u i d e
If rain is in the forecast for tomorrow, the system will automatically stop all watering for the next day. If you wish to override this rain hold, you can click
the Override button. This will override the rain shutoff until the following day when it will check the forecast once again. When the controller is on a rain
hold due to rain in the forecast, the display on the controller will indicate that all watering has stopped until tomorrow’s date due to rain.
If you have installed an optional rain sensor, Cyber-Rain will provide double protection against watering when it is raining. If rain has been detected by
the sensor, it will skip all scheduled watering events and state RAIN SENSOR HOLD. This hold will remain in effect until the rain sensor releases it and
after any time delay you have added in the Cyber-Rain setup. If you wish to cancel the rain sensor hold, you can click the Override button.
After the rain sensor dries there will be a countdown until the hold is cleared, depending on the time delay you have set (the default is 24 hours). To
manually cancel the hold immediately, click the Override button.