Installation Guide

47 | C y b e r - R a i n X C I S m a r t I r r i g a t i o n C o n t r o l l e r U s e r G u i d e
This panel expands when you have checked that a rain sensor is installed. The time delay (in hours) before the system resumes watering after the rain
sensor hold is no longer active can be adjusted. The user must also select the type of rain sensor installed (normally open/closed). Most rain sensors are
normally closed when not activated, so this is Cyber-Rain’s default setting. Consult the rain sensor’s manual to determine its connection type. See the
Using a Rain Sensor section for more information.
6. Flow Sensor Settings: If an optional flow sensor is installed, make sure the Flow Sensor Installed box is checked. Flow sensors are only compatible with
the Pro model.