User Manual

3 4
MAX O/P Voltage H138~H142
ESC
H140 In Utility Power settings, only 3
types of fixed voltage ranges could
be chosen. However, you can fine
tune the MAX O/P voltage in this
function.
If the utility voltage is usually high
and the connected equipment can
work in this condition, you can set
the output voltage range higher to
reduce the UPS from going to
Battery mode as often.
MIN O/P Voltage L98~L102
ESC
L100 In Utility Power settings, only 3
types of voltage ranges could be
chosen. However, you can fine
tune the MIN O/P voltage in this
function.
If the utility voltage is usually low
and the connected equipment can
work in this condition, you can set
the output voltage range lower to
reduce the UPS from going to AVR
Mode or Battery Mode as often.
Audible Alarm b On
b OFF
ESC
b On If b OFF is selected, the unit will
mute all alarms and the SILENT
MODE icon will appear on the LCD
display.
Return to Default Settings
YES
ESC
No Select Yes and press the SELECT
Button for approximately 3 seconds
to restore the UPS factory default
settings and go back to the status
display.
Return to Status Display
Press the SELECT Button for
approximately 3 seconds to go
back to the status display.
All rights reserved. Reproduction without permission is prohibited.