LCD KVM SWITCH IC-1704 / IC-1708 / IC-1716 USER MANUAL -1-
LCD MONITOR SPECIFICATIONS Size Screen Type Contrast Brightness View Angle Resolution Response Time Display Color 17 inch TFT 450:1 300 cd/m2 110° 1280x1024@75Hz 12 ms 16.7 M OPERATION Keypad Define Power key: Use this key to turn on or off the LCD monitor. Menu key: Use this key to open the OSD menu and enter to next menu or highlight a confirmed function. Up key: Use this key to highlight an item in the menu, move a highlighted function up, or increase the numeric value (parameter) in certain menu.
BRIEF INTRODUCTION The KVM Switch allows you to control several sets of personal computers by a keyboard, a mouse and a monitor. In the meantime, you just need to connect the cable and turn on the power to control up to 256 sets of personal computers without installing any additional interface card or software. Easy Installation The 3-in-1 CPU Connector (VGA, Keyboard and Mouse) can save the installation time and space and assure the correct signals.
FEATURES • • • • • • • • • • The keyboard, mouse and 15” LCD monitor was built-in on KVM switch. Standalone machine controls up to 4/8/16 sets of PCs. Cascade controls 64/128/256 sets of PCs. Through OSD, you can use the hot key, mouse clicking and push button on front panel to switch PCs. Monitors PC status by Auto Scan function. Supports resolution of 1280x1024, 75Hz and independently supports EDID & DDC2 of each PC.
SPECIFICATIONS CPU Connecter 3-in-1 HD-15 (Female) Monitor Console Mouse Connector Keyboard Port Selection Keys on Front Panel Port LEDs Power OSD Video Resolution Dimensions Weight Operating Temp Storage Temp Humidity IC-1704 IC-1708 IC-1716 4 8 16 17” TFT LCD Touch pad module Standard 104 key 4 8 16 4 1 8 1 Built-in 1280x1024@75Hz 600x450x48 mm 13.35 Kg 5-40℃ -20~60℃ 10~80%RH, non-condensing 16 1 13.3 Kg -5- 13.
CONFIGURATION IC-1704 Front View IC-1708 Front View IC-1716 Front View 1. Port Selection Switches Press the push button to directly switch to the corresponding PC. • In the cascade architecture, if the port is connected to KVM but not PC, then the push button will not respond. • Simultaneously press Push Buttons 1 and 2 to directly enter the OSD Control Mode.
An blue light indicates that the KVM is operating. IC-1704 Rear VIEW IC-1708 Rear VIEW IC-1716 Rear VIEW 1. CPU Port Install the cable connected to a PC here. 2. Updata Port The port provides a firmware update function. 3. AC Power Jack The AC Power is applicable for 100~240VAC, 50Hz~60Hz 4. Power Switch Power On/Off the LCD KVM.
INSTALLATION • Standalone 1. Make sure that the power switch at the rear panel of the KVM is OFF. Plug an end of the AC power cord into the KVM and the other end to an AC power supply. 2. Make sure to power off the PC and then install the 3-in-1 cable to each of the PC one by one.
power of the KVM is turned off), we recommend you to reinstall the whole system. Note: It is noteworthy that there are two levels available. •Expansion 1、PCs It is not necessary to power down the KVM or other computer connected to the KVM system. You only need to power off the desired PC and connect the PC to the CPU port of the KVM in parallel by the 3-in-1 cable, and then power on the PC. 2、Slave KVM Make sure the power switch at the rear panel of the KVM is OFF.
1. The Port Selection Switch functions only when connected to a PC. 2. If the Offline Skip of the OSD System Setting is Auto, then you cannot make any switch when pressing an offline Port Selection Switch. 3. For Auto Scan Mode, none of the Port Selection Switches functions. • Hot Key and Mouse Clicking Hot key and mouse clicking are applicable for switching a small section.
•Switch Menu Master List 1 2 03-04:Mail Ser 4 LIST: MASTER PWR C# KVM ? ? 01 02 ? 03 04 05 06 07 08 3 ? ? ? 4 NAME SVS Admin ♁ Θ 04 Mail Group 08 16 Peter Web Group Data Group Ο Θ ♁ Ο Ο Θ Press Enter F G??: Move Space: Edit Esc: Exit F1: Smart View Enter: Switching F4: Auto Scan F9: System Setting F5: Clear Name List Slave List 03-04:Mail Ser 4 LIST: Mail Group PWR C# KVM ? 01 ? 02 ? 03 ? 04 NAME Mail Ser 1 Mail Ser 2 Mail Ser 3 Mail Ser 4 SVS Θ Θ ♁ ♁ F G??: Move Space: Edit Esc: Exit F
3、This field shows the list of connections to the KVM, and the fields are described below: PWR: It shows the status of power supply and indicates a normal power supply for the equipment (PC or KVM) connected to the CPU port. C# : It shows the channel number; the IC-1704 will display 01~04; the IC-1708 will display 01~08 and the IC-1716 will display 01~08; 09~16 (Since the screen cannot display all at a time, therefore you can use PgUp/PgDn to switch the pages). KVM: It shows the KVM model.
•System Setting Menu System Setting Channel Display Mode: Channel Display Time: Auto Scan Time: OSD Entry Hot Key: Hot Key Switching: Mouse Clicking: Beeper Sound: Offline Skip: OSD Language: Security Level: Console Lock Time: ??: Move Space: Change F1: Information F8: Restore Default Setting Item Full 5 Sec 5 Sec Number Lock OFF OFF ON Manual English None 5 Min Esc: Exit F4: OSD Position Description For Port Switching, Auto Scan and OSD Close, Channel Display Mode the Monitor will show the Channel info
position. You can use the Up, Down, Left or Right keys on the keyboard or a mouse to move the OSD position. F8: Restore Default Setting; Restore the factory default settings. Please note that all name lists will be cleared and the system settings are set to the default settings as shown in the table above. Esc: Exit; Exit the system setting and close the OSD. If you have made changes in this option, the system will ask whether or not you want to save the setting before the selected option is effective.
F/W version is the updated version. TROUBLESHOOTING Confirm whether or not the cable is good and connected properly Q1 : What should we do if the keyboard has no response? A1a: Reboot the PC. A1b: For Auto Scan Mode, press [Esc] to exit. Q2 : A2a: A2b: What should we do if the mouse has no respond? Reboot the PC. For Auto Scan Mode, press [Esc] to exit. Q3 : A3a: What should we do if the OSD cannot display normally? If the KVM switch is a standalone, then power off the PC.
- 16 -
