Specifications

Status
Bits
5=1
6=1
7=1
8=1
9=1
10=1
11=1
12=1
13=1
14=1
15=1
Status
Alarm
Lost
data
Protected
Parity error
End-of-tape
Loadpoint
File mark
Controller
active
556 bpi
Not used
Write enable
Description
Indicates
PROTECT PROGRAM
switch is on
A parity
error is detected.
The end-of-tape marker is
sensed.
The load point is sensed.
The file mark is sensed.
The controller is active.
The tape is
set to 556 bpi.
The write enable ring is present.
1732.1/608/609" Mag netic Tape Controlle r
Status
Bits
0=1
1=1
2=1
3=1
4=1
5=1
6=1
Status
Ready
Busy
Interrupt
Data
End-of-
operation
Alarm
Lost
data
7=1 Protected
8=1
9=1
10=1
11=1
Parity error
End-of-tape
Loadpoint
File mark
96761450 A
Description
The tape unit is connected and
ready.
The equipment is busy.
Indicates an interrupt occurred
Read/write
data transfer
A parity error was detected.
The end-of-tape marker is
sensed.
The file mark or tape mark is
sensed.
Status
Bits
12=1
13=1
14=1
15=1
Status
556 bpi
800 bpi
7-track
Write enable
Description
The tape is
set to 556 bpi.
The tape is
set to 800 bpi.
The write enable ring is present.
1732.2/615.73/615 ·93 Mag net i c
Tape Controller
Status
~
0=1
1=1
2=1
3=1
4=1
5=1
Status
Ready
Busy
PE warning
PE lost data
End-of-
operation
Alarm
6=1 Lost data
7=1
8=1
9=1
10=1
11=1
12=1
13=1
14=1
15=1
PE transport
Parity error
End-of-tape
Loadpoint
File mark
556 bpi
800 bpi
7-track
Write enable
Description
The tape unit is connected and
ready.
The equipment is busy.
There was an error
in the PE
formatter that did not affect the
data transfer.
There was an error
in the PE
formatter that affected the data
transfer.
Data transfer was completed.
An error condition - see the
other error
status lists.
The controller is connected
to a
phase encoding transport.
A parity error was
detected
An end-of-tape marker was
sensed.
A file mark or tape mark is
sensed.
The tape is
set to 556 bpi.
The tape is
set to 800 bpi.
The write enable ring is present.
6-13