Specifications

Message
****S009****
****S010****
****S011****
****S012****
****S013****
****S014****
****S015****
Significance/ Action
The labeled file
is missing end-of-file
trailer labels.
Action: The file cannot be processed as
labeled.
The end-of-tape is sensed
on the output
file (unlabeled).
Action:
Close the file with end-of-volume
and reopen
after mounting the new tape.
Re-enter the function to complete
processing.
A double file mark has been sensed
on an
input file.
Processing is terminated.
Action:
Close the input file and mount
next volume. Re-enter the function
to
complete processing.
Invalid date.
Action:
Re-enter the date function with
the proper date.
The labeled volume sequence number is
incorrect (occurs
after OPEN file is not
opened).
Action: Mount the proper volume and
re-
open the file.
The
ZERO LENGTH block specified in the
OPEN FILE is not opened.
Action: Reopen, specifying the proper
block length.
The block or record length specified is not
a multiple
of two. FILE, is not opened.
Action: Reopen, specifying the even
block and record length.
If either the
block or record length is odd, the data
cannot be processed by the system.
Warning Error Messages
Message
xxxWOOOxxx
xxxW001xxx
5-14
Significance/Action
Blocking is not specified but the block
size and record size have been specified
differently in
OPEN.
Action: Open the file with the proper
parameters or
continu~ the statement.
The file count is specified as zero.
Action:
Re-enter the function with the
proper parameters or continue the
state-
ment.
Message
xxxW002xxx
xxxW003xxx
FDDUTY
Significance/ Action
The record count is specified as zero.
Action: Re-enter the function with the
proper parameters or continue
the state-
ment.
The input and output record lengths have
been specified differently for
COPY.
Action: Re-enter the function with the
proper parameters or continue the
state-
ment.
The
FDDUTY error codes are numeric and are preceded by
one of the three
characters below:
(blank)
An incorrect user record
*
+
Message
+0540
+0550
0610
+0620
+0630
0710
0810
The resources of the FDDUTY program and/or
computer
are not sufficient to execute.
A possible irrecoverable hardware problem
Significance
More than two bad tracks have been
detected
while initializing. Discard the diskette and
retry with another diskette.
The written track of initialized
data was not
read correctly, but the hardware did not
detect an error. Retry and/or request main-
tenance support.
Illegal
sector address; the user attempted to
write (using an *A,
*B, or *H request) beyond
the maximum allowable sector address.
Move
the program to a lower sector address or place
the program
on another diskette.
A
fatal flexible disk drive input/output error
has occurred. Assure
that the flexible disk
drive unit is ready (the diskette is inserted and
the door is closed) and
that the switches are
set properly (i.e., write enabled, initialize
enabled, and unit reverse).
If this has been
done,
retry with another diskette and/or
request maintenance support.
The written data, when read, does not compare
exactly. Retry and/or request maintenance
support.
The specified logical unit is not a flexible disk
drive.
One of the parameters of the last read request
record is illegal. For example, the
sector
address may be larger than the maximum
allowable
sector address.
96759450 A