Specifications

Message
B02, hhhh
B03, hhhh
Significance
The specified hexadecimal
address hhhh cannot be pro-
cessed by the breakpoint
program because it is pro-
tected.
The breakpoint limit is ex-
ceeded. The specified hexa-
decimal address is
the last
breakpoint processed.
RECOVERY PROGRAMS TO
SAVE SYSTEM STATE
Four programs are included in this group:
• Recovery, which allows dumps of core or mass memory
following job execution
• System abort dump, which allows any specified section
of core to be dumped following an abort stop
• CYBER 18 extended memory abort dump, which allows
any specified section of core within a page file to be
dumped following an abort stop
4-16
• On-line snap dump, which allows listing of the P, Q, A,
M, and I register contents at any time.
The
last three programs have no error messages; failure to
obtain the requested dump is noted by a failure to respond to
commands. The operator should check his request procedure
and repeat the appropriate process as described in the M505
reference manual.
RECOVERY
The recovery package allows the programmer to determine
the state of the system at the end of the job execution.
Recovery requests an operator command. Four standard
commands are available: to dump core, to dump mass
storage, to select an output device, or to terminate
recovery. The program is described in the M505 reference
manual.
There is only one error message:
Message
INCORRECT OPERATOR
ENTRY
Significance
The operator must re-
enter the proper com-
mand and parameter
list.
96769450 A