Specifications
E
S
S
S
E
E
Message/Significance
read/write capability specified for the primary
device.
Where: aa
is
the assigned alternate logical
unit for logical unit
uu
LU
uu
IS
SHARED
BUT
UNMATCHED
Significance: This error message indicates
inconsistently shared devices.
Where:
uu
is the logical unit
in
which bit
14
of
the
LOGI table entry is
set
but
for which there is
no
other log-
ical unit with an identical
physical device table
in
LOGIA.
LU
uu THREAD
jjjj
kkkk
Ull
mmmm
nnnn
0000
pppp qqqq
rrrr
•••
Significance: This support message gives
information about the logical unit threads.
It
lists the addresses of the threaded elements
until
it
encounters an empty entry (FFFF 16).
Where:
uu
is the logical unit whose
LOG2
entry
is
not FFFF
16
jjjj
is the entries
on
the thread
LU
uu
THREAD
MAY
BE
BROKEN
Significance:
If
more than
40
16
elements
are
on
the
logical unit thread, only the first
40
16
are
listed, and this message appears.
It
does
not appear for any logical unit whose thread is
empty
(that
is, FFFF
I6
)
LU
uu
WAS
MARKED
DOWN
Significance: Support message: bit 13 of the
LOGI table refiects an inoperative logical
unit. This message appears for each logical
unit marked down.
Where:
uu
is the logical unit number
LU
1
NOT
CORE ALLOCATOR
Significance: This error message indicates the
equipment type code
if
logical unit 1 does not
specify the software core allocator.
If
logical
unit 1 is
the
core allocator, the message is
suppressed.
···MASK
TABLE
ERROR
Significance: Header message indicates
that
the
tailed image mask table either contains an
error
or
was modified.
~
E
S
E
S
E
Message/Significance
***MASK
TABLE
ERROR
INITIALLY
Significance: Header message indicates
that
an error
was
detected
in
the autoload image
mask table.
MAX
CORE
WAS
hhhh
WITH
iiii
TO
jjjj
UN
PROT
Significance: Highest core location and bounds
of unprotected core. This support message
indicates
no
location error was detected.
It
appears twice
on
the printout. The first
appearance
is
for the autoload image and the
second for the failed image.
Where:
hhhh
is the contents of
F5
16
iiii is the contents of
F7
16
+1
jjjj
is the contents
of
F6
16
-1
MAX
CORE
WAS
hhhh
WITH
iiii
TO
jjjj
UNPROT (ERROR)
S~gnificance:
Error
in
core bounds. The error
message indicates
that
the unprotected bounds
exceed the limits of core,
that
the
top of
unprotected is below the bottom, or
that
some
of
the addresses
are
negative.
It
appears
twice
on
the printout. The first appearance is
for
the
autoload image, and the second is for
the
failed image.
Where: hhhh is the contents of
F5
16
iiii is the contents of
F7
16
+1
jjjj
is the contents of
F6
16
-1
MAXSEC
WAS
hhhhhhhh
Significance:
MAXSEC
value.
MAXSEC
is
in
the LOCORE program. This support message
for
the
error
in
MAXSEC
appears twice
on
the
printout. The first appearance is for the
autoload image and the second is for
the
failed
image.
MAXSEC
WAS
hhhhhhhh (ERROR)
Significance: Error in
MAXSEC.
The
following error message indicates
that
the
most significant bits specified
in
MAXSEC
were not zero. This support message appears
twice
on
the printout. The first appearance is
for
the
autoload image and
the
second is for
the failed image.
Where: hhhhhhhh is
the
most significant
bits
(msb)
96'169450
A