User's Manual

4. Charging the headset
This device has an internal, rechargeable battery which must be fully charged before used for the
first time. It takes you about 3 hours to charge the battery full for the first time. During charging, the
indicator shows a steady blue. When the battery is fully charged, the blue light will turn off. For the
later on charging, it takes about 90 minutes.
You can charge the headset either by using the USB charging cable or the car charger depending on
the package accessories available. Please check your package for details. EM260 is intended for use
with the chargers that is included in the package.
l It your package has a USB charging cable included
Plug the charger lead of USB charging cable into the charging port of your Bluetooth headset. And
then plug the other end of the USB charging cable into the computer’s USB port. When charging is
complete, remove the USB charging cable and remove the charger lead from your headset (Please
refer to Fig.1, Fig.2.)
l If your package has a car charger included
Plug the car charger into the cigarette lighter socket. And then plug the charger lead into the
charging port of the Bluetooth headset. When charging is complete, remove the car charger and
remove the charger lead from your headset (Please refer to Fig.3.)
l If your package has a travel charger included
Plug the travel charger into 110-240V wall socket. And then plug the charge lead into the charging
port on the Bluetooth headset for charging. When charging is complete, remove the travel charger
and remove the charger lead from your headset.
The fully charged battery has power for up to 4.5 hours of talking time or up to 90 hours of standby
time. However, the talk and standby times may vary when used with different mobile phones,
products that use a Bluetooth connection, usage settings, usage styles, and environments.
When the battery is running out of power, the blue indicator light starts to flash 3 times every 30
seconds. This indicates that the headset needs to be charged as soon as possible.
5. Switch on or off the headset
To switch on, when EM260 is in off state, press and hold the answer/end key for 4 seconds until the
blue indicator light turns on and keeps on for 3 seconds.
To switch off, when EM260 is in on state, press and hold the answer/end key for 4 seconds until the
blue indicator light flashes for 5 times.
6. Pair the headset with a compatible phone
Pairing is the process of establishing encrypted link between EM260 and Bluetooth devices.
Step-1 The headset must be powered off before you begin to initiate the paring.
Step-2 press and hold the answer/end key for 7 second until the blue light turns on and keeps on.
The headset is now in paring mode.
Step-3 Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth
devices. Check the user guide of your phone for instructions.
Step-4 Select the headset (EM260) from the list of found devices.
Step-5 When asked the PIN code, please enter “0000” to pair and connect the headset to your phone.