User's Manual

 IR:
Auto IR Night Vision Function
Status Description of Content of Harmful Substances
Toxic and Hazardous
Substances and Elements
Component Name
Host Accessories
Lead (Pb)
× ×
Mercury (Hg)
○ ○
Cadmium (Cd)
○ ○
Hexavalent chromium (Cr (VI))
○ ○
Polybrominated biphenyls (PBB)
○ ○
Polybrominateddiphenyl ethers
(PBDE)
○ ○
Note 1: The lead content of the small amount of the patch electronic components for special
purpose in the host, chargers, power lines (such as high voltage resistors, ceramic resistors,
diodes, etc.) may be ≥0.1%.
Screws in the host and the core in data lines use optimum performance alloys with the lead
content may be ≥0.1%.
These devices are in line with exemptions of EU RoHS directive requirements. Currently, there is
no alternative technology or component.
Note 2: The life of the various components of environmental protection:
Host: 10 years
Battery: 5 years。
Accessories: 10 years
The identified environmental life of this product refers to the safe life of the use of the product
under the specified conditions of use in this user manual in which toxic and hazardous substance
spills do not occur.
○represents the content of hazardous substances in all homogeneous materials of the component
is below the limit requirement in the SJ / T11363-2006 standard.
×representsthe content of hazardous substances in all homogeneous materials of the component is
beyond the limit requirement in the SJ / T11363-2006 standard.
Please at least 20 cm away from the body when using.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does