User's Manual

①Multifunction button
② LED indicator
③ volume +
④ volume -
⑤ mini USB charging port
⑥ forward
⑦ backward
⑧ Microphone
The picture is for reference only. Please check the product for details.
How to use BSH10
Turn on the headset：
When the headset is off, press and hold the multifunction button for 3 seconds until the blue
LED turns on for 3 seconds.
Turn off the headset：
When the headset is on, press and hold the multifunction button for 3 seconds until the red LED
turns on for 3 seconds.
Paring：
Pairing is the process of establishing encrypted link between BSH10 and Bluetooth devices.
Step-1 In the off state, press and hold multifunction key for about 7 second until the red and
blue LED flash alternatively.
Step-2 Follow the operating instruction of your Bluetooth mobile phone to start the pairing
process. Typically, this is done by going to a ”Connect” or “Setup” menu and then selecting the
option to search the BSH10 that is still in the pairing mode
Step-3 The mobile will find BSH10 headset and ask whether you are willing to connect your
mobile with the headset. Press “Yes” or “Confirm” to confirm this action.
Step-4 The mobile phone’s display should then prompt you for a passkey or PIN. Enter 0000 (a
sequence of four zeros) and the display should prompt the pairing result.
If the connection is successful, the blue LED of the headset will flash 3 times. Then blue LED
will flash one time every 7 seconds. If the pairing is unsuccessful, please turn off the headset
and turn it on again. Then, return to Step-1 and do the pairing procedure again.
Make a Call