Contents 1. Introduction Bluetooth wireless technology 2. Get started Overview Chargers and batteries Switch the headset on or off Pair the headset with a compatible phone Disconnect the headset from the phone Reconnect the paired headset to your phone Troubleshooting 3. Basic use Call handing Adjust the earphone volume Switch the call between phone and headset 4. Battery information 5. Care and maintenance 1. Introduction Thank you for purchasing the BH15.
headset BH15 allows you freedom to make and receive calls while on the move or in the office .You can connect the headset to a compatible phone that supports Bluetooth wireless technology. Please read the user manual to make the best use of this 4PR948 Headset and its many features. Bluetooth wireless technology Bluetooth wireless technology makes it possible to connect compatible communication devices without using cables.
The headset contains the following parts as shown in the figure: (1) Answer/end key (2) Indicator light (3) Volume key (4) Microphone (5) Earphone (6) Charger connector Before you can start using the headset, you must charge the battery and pair the headset with a compatible phone. Note: Parts of the headset are magnetic, Metallic materials may be attracted to the headset .Do not place credit cards or other magnetic storage media near the headset, because information stored on them may be erased.
USB charger cable that is included in the package. Charge the battery This device has an internal, rechargeable battery. It Connect the charger cable to the headset. 1. Connect the USB cable to a USB port. The red indicator light is displayed during charging. If charging does not start, disconnect the charger, plug it again, and retry. Charging the battery fully may take up to 2 hours. 2. When the battery is fully charged, the red indicator light turns off.
headset beeps 2 times and the red indicator light is displayed briefly. ■Pair the headset with a compatible phone 1. make sure your headset is turn off 2. push the answer key for 8 second until the blue light at all times. 3. Activate the Bluetooth feature on the phone, and set the phone to search for Bluetooth devices. See the user guide of your phone for instructions. 4. Select the headset (BH15) from the list of found devices. 5. Enter the pass code 0000 to pair and connect the headset to your phone.
·Move the headset more than 10 meters(30 feet) away from the phone. You do not need to delete the pairing with the headset to disconnect it. ■Reconnect the paired headset to your phone To connect the headset to your phone, switch on the headset, make the connection in the Bluetooth menu of your phone, or press and hold the answer/end key. You can set your phone to connect with the headset automatically when the headset is switched on. See the user guide of your phone for details.
3. Basic use ■ Call handling To make a call Use your phone in the normal way when the headset is connected to your phone. Redial the last dialed number If your phone supports redialing with this device, under standby mode, short press answer/end key once for last number redial. To answer a call Press the answer/end key, or use the phone keys. If the automatic answer function is set on, the phone automatically answers the incoming call after one ring.
■Switch the call between phone and headset During a conversation, press and hold the answer/end button for 3 Seconds, the BH15 will be switched off and the call will be transferred to your mobile phone. If you want to transfer the call back to your BH15 press and hold the Answer/end for 3 seconds till you hear a beep. Release the button and the call is transferred back to your BH15. 4. Battery information Your device is powered by a rechargeable battery.
summer or winter conditions, will reduce the capacity and lifetime of the battery. Always try to keep the battery between 15℃ and 25℃ (59℉ and 77℉). A device with a hot or cold battery may not work temporarily, even when the battery is fully charged. Battery performance is particularly limited in temperatures well below freezing. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Dispose of batteries according to local regulations. Please recycle when possible.
· Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics. · Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. · Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
FCC Information This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
